Loading…
This event has ended. Visit the official site or create your own event on Sched.

Log in to bookmark your favorites and sync them to your phone or calendar.

Basics [clear filter]
Monday, September 24
 

8:45am

SketchUp 201: Revisiting SketchUp fundamentals (Mac OS)
This workshop is built for those who want to re-approach the fundamentals of SketchUp as informed beginners. Taught by Josh Reilly from SketchUp, this course will revisit the keys to organized and efficient 3D modeling, covering many of the same topics at a slightly accelerated pace compared to The Complete Intro workshop. The fundamentals of SketchUp also include setting your models up for documentation and presentation, so you can expect a brief introduction to LayOut as well. Not sure which class to take? We’ll help you figure it out in Palm Springs! 

Speakers
avatar for Josh Reilly

Josh Reilly

Distributor of Knowledge, SketchUp
Josh's SketchUp journey began with the transition from building physical architectural models in college to spinning them around in pixelated 3D circa 2004. Josh has an Environmental Design / Architecture degree from the University of Colorado and has used SketchUp in small design... Read More →


Monday September 24, 2018 8:45am - 4:30pm
Springs Ballroom D

8:45am

SketchUp 201: Revisiting SketchUp fundamentals (Windows OS)
This workshop is built for practicing modelers who want to re-approach the fundamentals of SketchUp as informed beginners. Larry will revisit the keys to organized, fluid, and fast 3D modeling, covering many of the same topics (drawing, components, model organization) at a slightly accelerated pace compared to The Complete Intro workshop. Not sure which class to take? We’ll help you figure it out in Palm Springs!

Speakers
avatar for Larry Zent

Larry Zent

Owner, Design Time, LLC
Larry is the founder and owner of Design Time, LLC with a broad-based background in computer-aided drafting and design. He is recognized as an expert in teaching 3D software. Working throughout the states of Colorado, and Washington. With over 28 years in the design and drafting industry... Read More →


Monday September 24, 2018 8:45am - 4:30pm
Desert Ballroom 1

8:45am

The complete introduction to SketchUp (Day 1)
If you’re coming to 3D Basecamp to learn SketchUp from scratch (or close to it), this is the course for you. No need to decide which sessions to attend, because this is two full days of everything you need to become the SketchUpper that your friends and colleagues will come to for advice! Taught by Alex Oliver of SketchUpSchool.com, this course is designed and paced for true beginners. You can expect to cover drawing fundamentals, model organization, styling, and even a few advanced techniques. More to the point: you will leave capable of jumping right into your next SketchUp project with the confidence you need to do great work.
[Day 1 of 2]

Speakers
avatar for Alex Oliver

Alex Oliver

SketchUp Instructor, SketchUp School
Alex Oliver is the Founder & Lead Instructor for SketchUp School - the place where professionals go when they're serious about learning SketchUp. Since 2005, Alex and his team have taught SketchUp to over 25,000 professionals around the world via SketchUp School's online Video Course... Read More →


Monday September 24, 2018 8:45am - 4:30pm
Springs Ballroom F
 
Tuesday, September 25
 

8:45am

Introduction to modeling with components
If you want to be any good at SketchUp, a solid understanding of components is not just a good idea, it is imperative. We’ll take a deep dive into nested components and explore a few different approaches you might take when organizing your models. We’ll also explore cutting (i.e. window) components and where they do (and don’t) work best.

Speakers
avatar for Tyson Kartchner

Tyson Kartchner

Training, SketchUp
I've been part of the SketchUp team for almost 15 years, it's been a great ride. Happy to talk about SketchUp or my personal YouTube journey as GeeksWoodShop, where I create tackle woodworking, furniture, cosplay, and of course, SketchUp projects.


Tuesday September 25, 2018 8:45am - 10:15am
Springs Ballroom D

8:45am

Introduction to LayOut
Matt Donley, author of SketchUp to LayOut, will teach beginners how to use LayOut to turn a 3D model into a 2D presentation. Dimensions, labels, and annotations will be added to create a detailed construction document, and you’ll explore best practices for preparing your model for LayOut using Scenes. Walk away with a solid understanding of how LayOut can help you communicate your 3D designs.

Speakers
avatar for Matt Donley

Matt Donley

SketchUp Guru, MasterSketchUp.com
Matt Donley is the owner of MasterSketchUp.com, the author of SketchUp to LayOut, and co-author of SketchUp and LayOut for Architecture. He has been teaching SketchUp since 2012 through his online tutorials, as well as in person training. With a background in carpentry and project... Read More →


Tuesday September 25, 2018 8:45am - 12:00pm
Springs Ballroom A

8:45am

The complete introduction to SketchUp (Day 2)
If you’re coming to 3D Basecamp to learn SketchUp from scratch (or close to it), this is the course for you. No need to decide which sessions to attend, because this is two full days of everything you need to become the SketchUpper that your friends and colleagues will come to for advice! Taught by Alex Oliver of SketchUpSchool.com, this course is designed and paced for true beginners. You can expect to cover drawing fundamentals, model organization, styling, and even a few advanced techniques. More to the point: you will leave capable of jumping right into your next SketchUp project with the confidence you need to do great work.
[Day 2 of 2]

Speakers
avatar for Alex Oliver

Alex Oliver

SketchUp Instructor, SketchUp School
Alex Oliver is the Founder & Lead Instructor for SketchUp School - the place where professionals go when they're serious about learning SketchUp. Since 2005, Alex and his team have taught SketchUp to over 25,000 professionals around the world via SketchUp School's online Video Course... Read More →


Tuesday September 25, 2018 8:45am - 4:30pm
Springs Ballroom F

1:15pm

LayOut for woodworkers
We all know that LayOut is great at creating construction drawings for architectural projects, but how does it work for something smaller? Say you wanted to use LayOut to create a woodworking plan, or maybe an assembly guide? That would lead you down a different path and toward a different workflow. Fortunately, Dave Richards has been doing just this kind of detailed documentation in LayOut for years. Dave will show you how to create proposals, presentations, and construction plans for woodworking projects, as well how to customize LayOut for your own project style and preferences.

Speakers
avatar for Dave Richards

Dave Richards

Chief Broom Pusher, Richards Drawing Services
Dave Richards has been a SketchUp user and teacher for more than a 17 years. He uses SketchUp for a wide variety of projects from tiny medical devices to architectural projects. His primary use is drawing woodworking projects and plans for himself as well as for a number of professional... Read More →


Tuesday September 25, 2018 1:15pm - 2:45pm
Desert Ballroom 3

3:00pm

Gateway to extensions
Have you ever noticed tools on your neighbor’s SketchUp window that you don’t see in your own Large Tool Set, and the thought of adding extensions sounds intimidating? If the answer is yes, let Justin be your guide to the essentials of installing extra tools into SketchUp. In this workshop, he’ll introduce you to simple extensions like Selection Toys, DropGC, and PathCopy, and talk about all the amazing things extensions can do. Justin is also leading an intermediate level workshop called Extension madness, but this workshop is aimed at beginners who are looking for a gentle way to be ushered through the Gateway to Extensions!

Speakers
avatar for Justin Geis

Justin Geis

SketchUp Trainer/Construction Estimator, The SketchUp Essentials
Justin Geis is the founder of The SketchUp Essentials. Justin started using SketchUp as part of his work as a general contractor in 2008. He quickly realized the power of the software and started using it for personal projects. He started The SketchUp Essentials as a place to share... Read More →


Tuesday September 25, 2018 3:00pm - 4:30pm
Desert Ballroom 1
 
Wednesday, September 26
 

1:15pm

The key to making LayOut your own
Have you ever felt that you could be getting more out of LayOut? Well, the key to getting the most out of LayOut is customizing it to your own personal workflow. Dave Richards will guide you around the LayOut interface, show you how to create custom templates, and help you fine-tune LayOut so it works the way you need it to.

Speakers
avatar for Dave Richards

Dave Richards

Chief Broom Pusher, Richards Drawing Services
Dave Richards has been a SketchUp user and teacher for more than a 17 years. He uses SketchUp for a wide variety of projects from tiny medical devices to architectural projects. His primary use is drawing woodworking projects and plans for himself as well as for a number of professional... Read More →


Wednesday September 26, 2018 1:15pm - 2:15pm
Springs Ballroom A

1:15pm

SketchUp 201: Revisiting SketchUp fundamentals - Day 1 (Mac OS)
This workshop is built for those who want to re-approach the fundamentals of SketchUp as informed beginners. Taught by Josh Reilly from SketchUp, this course will revisit the keys to organized and efficient 3D modeling, covering many of the same topics at a slightly accelerated pace compared to The Complete Intro workshop. The fundamentals of SketchUp also include setting your models up for documentation and presentation, so you can expect a brief introduction to LayOut as well. Not sure which class to take? We’ll help you figure it out in Palm Springs!
[Day 1 of 2]

Speakers
avatar for Josh Reilly

Josh Reilly

Distributor of Knowledge, SketchUp
Josh's SketchUp journey began with the transition from building physical architectural models in college to spinning them around in pixelated 3D circa 2004. Josh has an Environmental Design / Architecture degree from the University of Colorado and has used SketchUp in small design... Read More →


Wednesday September 26, 2018 1:15pm - 5:00pm
Desert Ballroom 1

1:15pm

SketchUp 201: Revisiting SketchUp fundamentals - Day 1 (Windows OS)
This workshop is built for practicing modelers who want to re-approach the fundamentals of SketchUp as informed beginners. We will revisit the keys to organized, fluid, and fast 3D modeling, covering many of the same topics (drawing, components, model organization).
[Day 1 of 2]

Speakers
avatar for Larry Zent

Larry Zent

Owner, Design Time, LLC
Larry is the founder and owner of Design Time, LLC with a broad-based background in computer-aided drafting and design. He is recognized as an expert in teaching 3D software. Working throughout the states of Colorado, and Washington. With over 28 years in the design and drafting industry... Read More →


Wednesday September 26, 2018 1:15pm - 5:00pm
Desert Ballroom 9

1:15pm

The complete introduction to SketchUp (Part 1)
If you’re coming to 3D Basecamp to learn SketchUp from scratch (or close to it), this is the course for you. No need to decide which sessions to attend, because this course is everything you need to become the SketchUpper that your friends and colleagues will come to for advice! Taught by CHris Dizon from SketchUp, this course is designed and paced for true beginners. You can expect to cover drawing fundamentals, model organization, styling, and even a few advanced techniques. More to the point: you will leave capable of jumping right into your next SketchUp project with the confidence you need to do great work.
[Part 1 of 2]

Speakers
avatar for Chris Dizon

Chris Dizon

SU God, SketchUp
Chris joined the SketchUp team in its infancy with @Last Software and has found ways to use SketchUp for just about anything. It's also important to note that he thoroughly enjoys scones, coffee, and the Colorado outdoors.


Wednesday September 26, 2018 1:15pm - 5:00pm
Springs Ballroom F

2:30pm

Exploring interior design choices in SketchUp
One of SketchUp’s not-so-secret powers is helping designers (and clients) understand the choices at hand. Across furniture, finishings, and even basic room layouts, interior designers can use SketchUp to understand and evaluate important decisions and build rapport with clients. Specifically, this session will address the use of scenes, layers, and texture editing for comparing and communicating choices for layouts, furniture specifications, and finishings.

Speakers
avatar for Bonnie Roskes

Bonnie Roskes

3DVinci
Bonnie Roskes is a long-time SketchUp author, trainer, and modeler. Among Bonnie's many instructional materials offered at 3DVinci is the textbook Modeling with SketchUp for Interior Design, in use in many university-level interior design programs throughout the world. She also frequently... Read More →


Wednesday September 26, 2018 2:30pm - 3:30pm
Springs Ballroom A
 
Thursday, September 27
 

9:00am

SketchUp 201: Revisiting SketchUp fundamentals - Day 2 (Mac OS)
This workshop is built for those who want to re-approach the fundamentals of SketchUp as informed beginners. Taught by Josh Reilly from SketchUp, this course will revisit the keys to organized and efficient 3D modeling, covering many of the same topics at a slightly accelerated pace compared to The Complete Intro workshop. The fundamentals of SketchUp also include setting your models up for documentation and presentation, so you can expect a brief introduction to LayOut as well. Not sure which class to take? We’ll help you figure it out in Palm Springs!
[Day 2 of 2]

Speakers
avatar for Josh Reilly

Josh Reilly

Distributor of Knowledge, SketchUp
Josh's SketchUp journey began with the transition from building physical architectural models in college to spinning them around in pixelated 3D circa 2004. Josh has an Environmental Design / Architecture degree from the University of Colorado and has used SketchUp in small design... Read More →


Thursday September 27, 2018 9:00am - 12:00pm
Desert Ballroom 1

9:00am

SketchUp 201: Revisiting SketchUp fundamentals - Day 2 (Windows OS)
This workshop is built for practicing modelers who want to re-approach the fundamentals of SketchUp as informed beginners. We will revisit the keys to organized, fluid, and fast 3D modeling, covering many of the same topics (drawing, components, model organization).
[Day 2 of 2]

Speakers
avatar for Larry Zent

Larry Zent

Owner, Design Time, LLC
Larry is the founder and owner of Design Time, LLC with a broad-based background in computer-aided drafting and design. He is recognized as an expert in teaching 3D software. Working throughout the states of Colorado, and Washington. With over 28 years in the design and drafting industry... Read More →


Thursday September 27, 2018 9:00am - 12:00pm
Desert Ballroom 9

9:00am

The complete introduction to SketchUp (Part 2)
If you’re coming to 3D Basecamp to learn SketchUp from scratch (or close to it), this is the course for you. No need to decide which sessions to attend, because this course is everything you need to become the SketchUpper that your friends and colleagues will come to for advice! Taught by Chris Dizon from SketchUp, this course is designed and paced for true beginners. You can expect to cover drawing fundamentals, model organization, styling, and even a few advanced techniques. More to the point: you will leave capable of jumping right into your next SketchUp project with the confidence you need to do great work.
[Part 2 of 2]

Speakers
avatar for Chris Dizon

Chris Dizon

SU God, SketchUp
Chris joined the SketchUp team in its infancy with @Last Software and has found ways to use SketchUp for just about anything. It's also important to note that he thoroughly enjoys scones, coffee, and the Colorado outdoors.


Thursday September 27, 2018 9:00am - 12:00pm
Springs Ballroom F

1:15pm

Introduction to LayOut
Matt Donley, author of SketchUp to LayOut, will teach beginners how to use LayOut to turn a 3D model into a 2D presentation. Dimensions, labels, and annotations will be added to create a detailed construction document, and you’ll explore best practices for preparing your model for LayOut using Scenes. You'll walk away with a solid understanding of how LayOut can help you communicate your 3D designs.

Speakers
avatar for Matt Donley

Matt Donley

SketchUp Guru, MasterSketchUp.com
Matt Donley is the owner of MasterSketchUp.com, the author of SketchUp to LayOut, and co-author of SketchUp and LayOut for Architecture. He has been teaching SketchUp since 2012 through his online tutorials, as well as in person training. With a background in carpentry and project... Read More →


Thursday September 27, 2018 1:15pm - 5:00pm
Springs Ballroom G

2:30pm

Four rules for SketchUp success
If you’ve mastered SketchUp’s basics and are ready for some new challenges, this presentation is for you. Used smartly, SketchUp can help you become a better woodworker and maker. That’s because building a model serves as a dress rehearsal for the actual construction, so when you’re in the shop you can work faster and with fewer costly mistakes. Using SketchUp smartly means following the four good practices that David outlines. You’ll see how they make it easy to create complex models of furniture and cabinets quickly, cleanly, and—most importantly—accurately.

Speakers
avatar for David Heim

David Heim

Journalist, Self-employed
David is a veteran book and magazine editor who specializes in woodworking. After a twenty-eight year career at Consumer Reports, he moved to Fine Woodworking magazine. David has been using, teaching, and writing about SketchUp since 2007. He’s edited three books about SketchUp... Read More →


Thursday September 27, 2018 2:30pm - 3:30pm
Desert Ballroom 12